Not exactly sure what they want? Gift Certificates are are great way to let them decide for themselves. Available in preset increments or any amount you like. You can then email or print the Certificate for the lucky recipient. Redeemable through our website or by phone.
RAW POWER - Flexible LED Strips
Make your own accents, wheel lights, brake lights, signals, etc. with these Extremely Bright, Super Flexible, Totally Waterproof and smallest profile LED's available!! These are the same LED's we use with our PowerPUC Wheel Lighting Systems so you know they are made of the highest quality and durability. We use only the brightest 5050 series LED chips.
Wire Tie Mounts (Pack of ten)
Pack of (10) ten.
1/2" X 1/2" Wire tie mounts with double sided tape. Great for anywhere on your bike you need small attachment points for wiring.
RGB 2 into 1 "Y" splitter
1 into 2 "Y" splitter for combining 2 led strips with quick connects into one. 2 female connectors on one end, 1 male connector on other.
On/Off Button Switch
Weatherproof push-button switch for anywhere on your bike to control 12 volts. Use for LED's, radios, accessories or anyplace you need a simple On / Off button. Mounts through 3/8" hole or can be mounted with double stick tape (Not included). Comes with 10" wire.
Fuse Block with (2) 5 amp fuses
Protect your investment in electronics by always installing a high quality watertight fuse block. Comes with (2) 5 amp. fuses.
Dual Element Diodes
Use these units when changing to LED turn signals. Running lights will be at 75% brightness, turn signals will function at 100% brightness.
Genuine 3M adhesive promoter should be used anywhere you will be applying adhesive backed products. Clean surface prior to using
(2) Five Position Wire Connectors
Connect all your wiring with no soldering. Simply insert stripped wire into holes, close lever and wires are locked in place. (Sold in Pairs)
Maintains stock flash rate when installing LED turn signals. Sold in Pairs.
"SCMF", Multi-Function Remote Controller For Single Color Systems
With literally dozens of control functions, the SCMF Remote is one of the most powerful remote controllers available for single color systems. Multiple strobe, flash, fade, breathe and an On/Off function can be controlled up to 150 feet away. Comes with 2 key fobs.
Discount Price $36.50
High Density, 1 millimeter Flexible LED strips.
These extremely bright, super dense 1mm LEDs will cause you to see spots if you look directly at them for more than a few seconds. 12" LED strip can be cut every 3 LEDs to fit your application. Includes 24" of clear shrink tube and double-stick tape so you can make multiple lights from this one strip. Perfect for making your own custom lighting. Suitable for Run, Turn, and / or Brake lights.
(Dual element diodes, load equalizers, Run/Turn/Brake controllers may be necessary depending on your application.)
Color Changing (Requires RGB LED's) / Color switching Remote
For Color Changing LEDs or Color Switching systems. This remote features multiple Strobe, Fade, Morph and Memory functions to give you 15 different colors and multiple effects including strobe, fade, breath, dim and morph. 3 Connectors make for easier installation of "Zones" for you bike.
Discount Price $42.50
License Plate Mount with Lighted Frame
Under-Tail plate mount gives a finished look to your "De-beavered" Bike. Includes chrome trim with light. (Will fit only bikes with our Stealth, rear light kits)
Run / Turn / Brake Module
The RTB module converts the rear turn signal lights to function as brake and turn signal lights...and now has Running Light Capabilities!
M-109 Derby Covers
Derby cover with "M109R" graphic. Less than 10 minutes to install. Precision cut from P&O steel then triple show chromed. Surface can also be treated and painted to match your bike
109 "Edge Glow" Derby Covers
Our proprietary "Edge Glow" lens is added to our standard Derby covers to create a bright, yet even glow to the logo and around the edge of the cover. It's a perfect addition to your existing accent lighting or as a stand-alone signature item. Standard chrome finish. You can also paint any color to match your bike. Pick the LED light color of your choice.
Note: If color changing (RGB) LEDs require appropriate controller.
Raider Integrated Tail Light
- Fits 2008 2009 2010 2011 2012 2013 2014 Yamaha Road Star Raider, Raider S and Raider SCL (except 2014 Raider SCL).
- Complete Plug and Play Integrated LED tail light with High Quality clear lens - OEM fitment.
- Features Microprocessor based Blaster-X Technology with Brake Alert, Turn Alert, and Strobe Mode.
- New 2nd Generation Programming Interface allows users to easily customize features.
- New Sure-Blink Technology.
- Plug and play connectivity with OEM connectors.
- Recommended accessories: Blaster-X Control Switch & ELFR-1 QD Flasher Relay *OR Stage II Load Equalizers (* see note in Installation Tab).
- Made in the USA.
- 2-year Warranty & Satisfaction Guarantee.
M-109 FLATZ Turn Signals
New and improved "FlatZ" are another way to distinguish your M-109 with a super stealth, super clean look. Only the shape remains from earlier models. New 3X brighter LEDs combine with our innovative "Edge-Glow" lens to create an even, yet brilliant light with no hot-spots that is visible from front and side. Fits equally well on front and back of bike. Black or Chrome finish and includes FREE "Magic Blinker" signal controllers.