Save over $20.00 over our already low prices by combining our LED Accent Kits for Engine, Ground Effects, front and rear wheels / bags, into one total package!! Everything you will need to accent your entire bike from front to back with a total of 180 mind-blowing LEDs:Includes:(12) 9-LED strips for engine, tank and front forks.(4) 18 LED strips for Ground Effects and rear wheel / under bag.(1) Wiring kit with all connectors, (1) Installation kit with wire ties, micro wire tie mounts, terminals, quick connectors, adhesive promotorADD COLOR CHANGING (RGB) REMOTE CONTROLLERADD SINGLE COLOR REMOTE CONTROLLER
Save over $20.00 over our already low prices by combining our LED Accent Kits for Engine, Ground Effects, front and rear wheels / bags, into one total package!! Everything you will need to accent your entire bike from front to back with a total of 180 mind-blowing LEDs:Includes:(12) 9-LED strips for engine, tank and front forks.(4) 18 LED strips for Ground Effects and Swing arm / rear wheel.(1) Wiring kit with all connectors, (1) Installation kit with wire ties, micro wire tie mounts, terminals, quick connectors, adhesive promotor.ADD OPTIONAL COLOR CHANGING (RGB) REMOTE CONTROLLERADD OPTIONAL SINGLE COLOR REMOTE CONTROLLER
Make your own accents, wheel lights, brake lights, signals, etc. with these Extremely Bright, Super Flexible, Totally Waterproof and smallest profile LED's available!! These are the same LED's we use with our PowerPUC Wheel Lighting Systems so you know they are made of the highest quality and durability. We use only the brightest 5050 series LED chips.
These extremely bright, super dense 1mm LEDs will cause you to see spots if you look directly at them for more than a few seconds. 12" LED strip can be cut every 3 LEDs to fit your application. Includes 24" of clear shrink tube and double-stick tape so you can make multiple lights from this one strip. Perfect for making your own custom lighting. Suitable for Run, Turn, and / or Brake lights. (Dual element diodes, load equalizers, Run/Turn/Brake controllers may be necessary depending on your application.)
For Color Changing LEDs or Color Switching systems. This remote features multiple Strobe, Fade, Morph and Memory functions to give you 15 different colors and multiple effects including strobe, fade, breath, dim and morph. 3 Connectors make for easier installation of "Zones" for you bike.
Sold per foot. RAW Design Specific jacketed Wire with Red, Green, Blue, Black/white strands
Sold per foot. RAW Design Specific jacketed Wire with 2 Wires for single color lights.
Weatherproof push-button switch for anywhere on your bike to control 12 volts. Use for LED's, radios, accessories or anyplace you need a simple On / Off button. Mounts through 3/8" hole or can be mounted with double stick tape (Not included). Comes with 10" wire.
Plug and play extension wire for RGB LED accent Kits. Male on one end and female on other.
Plug and play extension wire for LED accent Kits. Male on one end and female on other.
1 into 2 "Y" splitter for combining 2 led strips with quick connects into one. 2 female connectors on one end, 1 male connector on other.
Combine wires from 5 individual strips of LEDs into one. Makes wire runs neater and simpler.
Genuine 3M adhesive promoter should be used anywhere you will be applying adhesive backed products. Clean surface prior to using
Protect your investment in electronics by always installing a high quality watertight fuse block. Comes with (2) 5 amp. fuses.
With literally dozens of control functions, the SCMF Remote is one of the most powerful remote controllers available for single color systems. Multiple strobe, flash, fade, breathe and an On/Off function can be controlled up to 150 feet away. Comes with 2 key fobs.
Pack of (10) ten.1/2" X 1/2" Wire tie mounts with double sided tape. Great for anywhere on your bike you need small attachment points for wiring.
Connect all your wiring with no soldering. Simply insert stripped wire into holes, close lever and wires are locked in place. (Sold in Pairs)